RV Rack System for Carrying Bikes and Kayaks
By Bill Siuru
Countless Functions
Because the rack's arms are adjustable, it is possible for the rack to carry small bikes for kids, or even mountain bikes with odd–size frames or shocks. Once you arrive at your destination, you simply switch the attachments and dry any wet towels on the folding–camper clothesline. An optional cover can be attached to the top arm.
Among the optional accessories is a 150–pound–capacity cargo tray used for carrying coolers, firewood, chairs and other camping–convenience items. This 19x52–inch cargo tray, used on the lower two settings, is height adjustable, enabling it to be used as a dining or food–preparation table, as well as a hobby platform. When coupled with an optional cutting board, the cargo tray becomes a perfect place to prepare vegetables or clean fish. You can even attach the flags of your favorite team or race car driver when you're enjoying a tailgating weekend. Accessories are easily changed utilizing two spring pins, so you do not need to pack any specialized tools.
If your RV has back storage compartments or if you have a diesel–pusher motorhome, by simply pulling the two lower spring pins, the rack will pivot to the ground, allowing easy access to the RV's rear compartments.
With the RV/SUV version of the RV Rack, you can tow a trailer, boat or dinghy without removing the rack, as long as you are careful not to exceed the 500–pound tongue weight, which includes the weight carried on the rack itself.
To prevent the rack from wiggling and rocking in the receiver, the rack system is designed in such a way that the bottom plate stays on the RV or SUV.
RvRaxx also supplies two 5/8–inch bolts and lock washers that take the place of the standard pin and clip; this measure will minimize most movement.
Rides Securely
Unlike other bicycle racks, RvRaxx units offer the option of being attached to the roof, to minimize swaying and bouncing, which potentially could rip off the bumper. An available roof–mounted stabilizer bar attaches to the upright brackets on the rack to eliminate any rocking.
On each side of its center–line, your RV, camper or SUV needs to have at least 14–inch clearance that is unobstructed by ladders, non–movable spare tires or other accessories. If there is a spare tire clamped to your vehicle's bumper, you can simply move it to one side.
Ray Ripaldi and brother, Pete, longtime campers, began marketing their multipurpose rack system about three years ago. Ray notes that while the price is at the higher end, it's because of the exceptionally high–quality construction used. For example, the two main uprights are constructed of lightweight aluminum so they will not rust. All of the steel parts use an exterior, high–grade powder coating. Finally, the racks are made by a family–owned company in the U.S.
For More Information
RvRaxx LLC
P.O. Box 4848
Manchester, NH 03108–4848
(800) 723–6295
This article courtesy of CamperWays
Order Today to have CamperWays delivered directly to your home.
|
|
